Big Dipper® W-200-IS
Choose Big Dipper, the Proven Automatic Grease Trap
The Big Dipper Automatic Grease and Oils Removal System takes the guesswork out of grease recovery. It’s ideal for kitchens and sites that want to protect internal plumbing from grease build-up and manage their own grease recovery instead of relying on a third party to clean the unit which could cost thousands of dollars per year.
- Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with digital control interface and Grease Collector.
- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
Materials:
Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 60 Hz, 520 Watts (4.5 Amps)*
Maximum Inlet Flow Rate: 20 GPM (1.26 l/s)
Number of Skimming Wheels: 1
Skimming Rate: 20 Pounds Per Hour (9.08 Kg Per Hour)
Grease Retention Capacity: 40+ Pounds (18.14 Kg)
Internal Solids Strainer Capacity: 1.85 Gallons (7 L)
Thermaco Big Dipper Model No. W-200-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated at 20 gallons per minute (1.26 l/s) peak flow, 40 pounds (18.14 Kg) of grease capacity and includ- ing as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with overload protection. Two (2) no-hub connectors for plumbing connection provided.
*Electrical Variations
W-200-IS: 115V 50/60Hz, 520 Watts (4.5 Amps)
W-200-IS-E: 230V 50/60Hz, 520 Watts (2.3 Amps)
Unit may be improperly listed as W200IS, W-200IS, W200-IS, W-200, W200, 200-IS or 200IS
CAD Drawings
